Exerpeutic 1111 Owner's Manual page 15

Tool:
Multi Hex Tool with
Phillips Screwdriver
5. Computer Installation
Remove four M5x10 Bolts (39) from the Computer (9). Remove bolts with the Multi Hex
Tool with Phillips Screwdriver provided.
Connect the Extension Wires (63) and Extension Sensor Wire (64) to the wires that come
from the Computer (9). Tuck wires into the Front Handlebar Post (6).
Attach the Computer (9) onto the top end of the Front Handlebar Post (6) with four M5x10
Bolts (39) that were removed. Tighten bolts with the Multi Hex Tool with Phillips
Screwdriver provided.
14