Assigning A Ccr Tree To A Greeting Table - Nortel CallPilot 100 Administration Manual

88 Chapter 7 Working with CCR Trees

Assigning a CCR Tree to a Greeting Table

Before incoming callers can access a CCR Tree, you must assign lines to a Greeting Table.
For information about assigning lines to Greeting Tables, refer to
page 58.
To assign a CCR Tree to a Greeting Table
Log:
QUIT RETRY
Admin
MBOX AA
Auto Atdt Admin
GRTG TABLE
Grtg table:
RETRY
AA menu prompt:Y
CHNG
Morn CCR tree: NO
CHNG
Morn CCR tree: NO
CHNG
Morn CCR tree:
DISABLE
Tree enabled
Morn CCR tree: x
CHNG
N0025636 02
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
Press AA.
2
OTHR
Press TABLE.
3
LINES
Enter the Greeting Table number and press OK.
4
OK
Press OK.
5
OK
Press NEXT until you see this display.
6
OK
Press CHNG if you want to assign a CCR Tree to the Greeting Table
7
NEXT
for the morning
or
press NEXT if you do not want to assign a CCR Tree and go to step
11.
8
Enter the number of the CCR Tree that you want to assign to the
Greeting Table for the morning.
9 This display appears briefly.
10 Press NEXT if you want to assign afternoon, evening and
NEXT
non-business CCR Trees to the Greeting Table
or
press ® to end the session.
"Configuring line answering" on