Nortel CallPilot 100 Administration Manual page 40

40 Chapter 4 Working with mailboxes
xxxx:
RETRY
Accept: x
RETRY
Alt1 ext: xx
CHNG
Alt1 ext:
RETRY
Alt1 ext: xx
CHNG
Alt2 ext:xxx
RETRY
Alt2 ext:xxx
RETRY
Msg line:xxx
CHNG
Msg line:
RETRY
Msg line: xx
CHNG
Xfers:blind
CHNG
N0025636 02
20 Enter the Line or Pool number and press OK.
OK
Line numbers must be between 1 and 500. Although line pools have
a letter such as A, B or C, CallPilot accepts only numbers. If you
enter a line pool use 1 for A, 2 for B, 3 for C, and so on.
21 Press OK.
OK
Steps 22 through 26 appear only if the mailbox has Alternate
extensions. If not, go to step 27.
22 If you want to change or delete the first Alternate extension press
NEXT
CHNG
or
if you want to change the second Alternate extension press NEXT and
go to step 25.
NOTE: If you delete the primary alternate extension using
≤·°‹, the second alternate extension is automatically
deleted.
23 If you want to delete the first Alternate extension, press £
OK
or
if you want to change the Alternate extension, enter the new
extension number and press OK.
24 Press CHNG to change the second Alternate extension.
NEXT
25 If you want to delete the second Alternate extension, press £.
OK
The display shows: Alt2 ext: (none)
or
if you want to change the second Alternate extension number enter
the new extension number and press OK.
Alt2 ext appears only if Alternate extension 1 is assigned.
26 Press NEXT.
OK
27 Press CHNG to change or assign an Express Messaging Line
NEXT
or
press NEXT and go to step 29.
28 Enter an Express Messaging Line number between 1 and 500
OK
and press OK.
29 Press NEXT.
NEXT
30 Press CHNG if you want to change the Call Screening status
NEXT
or
press NEXT and go to step 31.