Adding A Transfer Node - Nortel CallPilot 100 Administration Manual

82 Chapter 7 Working with CCR Trees

Adding a Transfer node

A Transfer node directs a caller to an internal or an external number. You can add a Transfer node
to a CCR Tree at any time.
To add a Transfer to an internal extension
Log:
QUIT RETRY
Admin
MBOX AA
Admin
GLIST CCR
CCR Admin
ADMIN
CCR tree:
RETRY
Tree: x
CHNG
Path:
RETRY END
x
MENU INFO
x
XFER LVMSG
Transfer
EXT INT
Ext:
RETRY
Path:
RETRY END
Tree: x
SAVE
Save as tree x
YES OTHR
Tree saved
CCR Admin
ADMIN
N0025636 02
Press ≤·°‹.
1
OK
Enter the System Administrator Mailbox number and password,
and then press OK.
Press OTHR.
2
OTHR
Press CCR.
3
Press ADMIN.
4
5 Enter the number of the CCR Tree you want to add a Transfer node
OK
to and press OK.
Press CHNG,
6
QUIT
Enter the Path number and press OK.
7
OK
For example, to create a Transfer node on the second level of a CCR
Tree, enter ⁄⁄. The first 1 is the path of the first level Menu
node. The second digit is the path where you want to create the
Transfer node.
Press OTHR.
8
OTHR
Press XFER.
9
OTHR
10 Press INT.
11 Enter the extension.
OK
12 Press END.
OK
13 Press SAVE.
QUIT
14 Press YES.
QUIT
15 This display appears briefly.
16 Press ® to end the session.