Outdialing - Nortel CallPilot 100 Administration Manual

Outdialing

You can designate the maximum number of voice channels that CallPilot can use at one time to
place outgoing calls. The default number of voice channels assigned for outdialing is one (1).
Outdialing calls are placed when you use Off-premise Message Notification, Outbound Transfer or
AMIS networking.
Set Outdialing channels to no more than half of the total channels available on CallPilot.
Ensure you reserve enough channels to accommodate incoming calls.
Note: Enable Outbound Transfer only for users who require this feature. Outbound
Transfer increases the likelihood of unauthorized use of the CallPilot system.
For more information on Off-premise Message Notification and Outbound Transfer features, refer
to "Class of Service values" on page
To designate the number of channels for outdialing
Log:
QUIT RETRY
Admin
MBOX AA
Num of chans: 1
CHNG
Num of chans:
RETRY
22.
≤
1
Press
OK
Enter the System Administrator mailbox number and password,
and then press OK.
Press fi.
2
OTHR
This option does not appear as a display button option.
Press CHNG.
3
OK
4
Enter the number of channels, between 1 and 4, that you want to
OK
use for outdialing and press OK.
Press ® to end the session.
5
Chapter 9 CallPilot operations
·°‹.
CallPilot Telephone Administration Guide
115