Card Restore - Korg PA 80 User Manual

17-18 Disk edit environment
Page 11 - Card Restore
ENTER/YES to confirm overwriting of existing data, or
EXIT/NO to abort, and repeat the folder naming.
If you selected the floppy disk drive as the backup
8.
device, insert the various disks as required by the instru-
ment., and press ENTER to continue:
Insert 1.4MB FD #1
and press Enter
If the floppy disk is not empty, Pa80 asks if you want to
format it:
Disk not empty!
Sh+Enter to format
Keep SHIFT pressed, and press ENTER to format the
disk. Pa80 tries a Fast Format, and makes a Full Format
if the former is not possible.
9. During the Backup, the "Working..." message will
appear in the display, showing you the operation's
progress.
Working...
Since the backup data is compressed, it is not possible to
know how many disks you will need in advance. When
finished, label the disks with progressive numbers, and
keep them in a safe place.
Warning: If you remove the card during the Backup, the
operation is aborted.
PAGE 11 - CARD RESTORE
While in this page, you can restore the Flash Data content
from a backup folder (see "Page 10 - Card Backup" above for
details on the Backup procedure).
Disk:Card Restor
!456.SET
!789.SET
BACKUP
HD SELECT OPEN
0%
|
|
CLOSE
Warning: When restoring data, all existing data on the Flash
Card will be deleted!
Restore procedure
Insert a formatted Flash Card to receive the data to be
1.
restored into the FLASH CARD slot on the back of the
instrument.
If the Backup data is contained into a series of floppy
2.
disks, insert the first disk into the floppy disk drive.
3. Go to "Page 11 - Card Restore".
4. Use the F1 button to select the source device (HD or
FD).
Use the E-H VOLUME/VALUE buttons, or the TEMPO/
5.
VALUE controls, to move the folder to select to the first
line of the display.
Press F3 (Open) to open the selected folder. Press F4
6.
(Close) to close the current folder.
When the ".CRD" folder containing the Backup data is
7.
on the first line of the display, press F2 (Select) to select
it. The "Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort
If you selected the floppy disk drive as the source device,
8.
insert the various disks as required by the instrument,
and press ENTER to continue.
Insert 1.4MB FD #1
and press Enter
During the Restore, the "Working..." message will
9.
appear in the display, showing you the operation's
progress.
Working...
Note: The Restore operation on a 8MB card lasts for about
13 minutes.
Warning: If you remove the card during the Restore, the
operation is aborted.
0%