Global Edit Environment; The Write Window; Menu - Korg PA 80 User Manual

16. GLOBAL EDIT ENVIRONMENT

The Global edit environment is the place where you can set
most of the Pa80 global functions, i.e. functions overriding
any operating mode. This edit environment overlaps the cur-
rent operating mode (Style, Song Play, Song, Backing
Sequence).

THE WRITE WINDOW

Open this window by pressing the WRITE button while one
of the Global pages is in the display. Here, you can save vari-
ous global settings, the settings for the Internal FX proces-
sors, or settings for the optional Vocal/Guitar Processing
Board effects.
Among the global settings saved with this page are also the
Preference parameters of the Style Play and Song Play mode,
plus the Global Protect and Hard Disk Protect parameters of
the Disk mode. The Split Point is also saved here.
Write to:
Global
Int. FX:1
Vcl/Gtr:1
Global
Select this parameter to save all Global parameters (apart
from the Input/Internal FX and Vocal/Guitar parameters).
The parameters are saved to the Flash-ROM, and will stay in
memory even when turning the instrument off.
1. Select this parameter by pressing the A VOLUME/
VALUE buttons.
Press ENTER twice.
2.
Internal FX Set
Select this parameter to save the Internal FX settings for the
Audio Inputs. The parameters are saved in the Flash-ROM,
and will stay in memory even when turning the instrument
off.
1. Select this parameter with the C VOLUME/VALUE but-
tons.
Use the C VOLUME/VALUE buttons, or the TEMPO/
2.
VALUE controls, to select one of the 16 Internal FX
Setup locations.
If you wish to change the Setup name, press one of the G
3.
VOLUME/VALUE buttons. The name goes in text edit
mode:
Int.FXSet:1
Mic/Rev1
Guitar1
Mic/Rev1
Global edit environment
4. Move the cursor using the DOWN/- and UP/+ buttons.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
DELETE button.
Press ENTER twice to confirm.
5.
Vocal/Guitar Setup
Select this parameter to save the Vocal/Guitar Processing
Board settings. The parameters are saved in the Flash-ROM,
and will stay in memory even when turning the instrument
off.
Select this parameter with the D VOLUME/VALUE but-
1.
tons.
Use the D VOLUME/VALUE buttons, or the TEMPO/
2.
VALUE controls, to select one of the 16 Vocal/Guitar
Setup locations.
If you wish to change the Setup name, press one of the H
3.
VOLUME/VALUE buttons. The name goes in text edit
mode:
Vcl/GtrSet:1 Guitar1
Move the cursor using the DOWN/- and UP/+ buttons.
4.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
DELETE button.
5. Press ENTER twice to confirm.

MENU

From any page, press MENU to open the Global edit menu.
This menu gives access to the various Global edit pages.
When in this menu, select a section using the VOLUME/
VALUE buttons, press PAGE+ to select a page, or press EXIT
to exit the menu.
When in a page, press EXIT to go back to current operating
mode (Style Play, Song Play, Song, Backing Sequence).
Global Menu
General Ctl Midi Out
Pdl/Fw/Sld
MidiSet/Ctl AudioIn IFX
Midi In
16-1
The Write window
In/Out Cfg
Vocal/Gtr