Video Interface; Assignable Pedal/Footswitch, Assignable; Slider, Ec5; Midi Setup - Korg PA 80 User Manual

internal tone generator. Therefore, the Scale
will be applied before transposition. For exam-
ple, if you altered an E, and then set the Master
Transpose to +1, the altered key will still be E
(that will play an altered F).
PAGE 3 - VIDEO INTERFACE
If a Video Interface Board is fitted into your Pa80, use this
page to program it.
Gbl:Video IF
System:PAL
Character:Big
Colors:1
Xctl:16
System
Selects the video standard (PAL or NTSC).
Character
Select the character size (Big or Small).
Colors
Selects a color set for the lyrics and background.
1...6 Color set.
X/Y control
These parameters lets you adjust the image position on the
external monitor.
PAGE 4 - ASSIGNABLE PEDAL/FOOTSWITCH,
ASSIGNABLE SLIDER, EC5
This page lets you program the Assignable Pedal/Footswitch,
the Assignable Slider, and the EC5 multiswitch.
Gbl:P/Sw-Sld-EC5
P/S:Soft
Sld:M.Volume
EC5-A:Off
EC5-B:Off
See page 21-1 for a list of the assignable functions. The first
functions are switch-type functions, while the remaining
(starting from Master Volume) are continuous-like func-
tions.
P/S (Pedal/Switch)
Continuous pedal, or footswitch, connected to the ASSIGN-
ABLE PDL/SW connector.
Sld (Slider)
Function assigned to the ASSIGNABLE SLIDER on the front
panel.
Tone
Scale Transpose
generator
Yctl:48
|
|
Global edit environment
EC5-A...E
Each of the switches of a KORG EC5 multiswitch.
Damper Pol. (Damper Polarity)
Polarity of the Damper pedal.
Pedal/Sw. Pol. (Pedal/Footswitch Polarity)
Polarity of the Assignable pedal or footswitch.
PAGE 5 - MIDI SETUP
MIDI channels can be automatically configured by selecting a
MIDI Setup. Each of them assigns the best values to various
MIDI parameters, to allow an easier connection with a par-
ticular MIDI controller.
Gbl:Midi Setup
Default
Master Kbd
Sequencer1
Sequencer2
Note: After selecting a MIDI Setup, you can apply any changes
to each channel's settings. To store the changes in memory, press
WRITE and save the Global in memory.
See "MIDI" on page 8-1 for more information on using the
MIDI Setups.
Default This a default setting. It is suitable both for
programming on an external sequencer, and
for playing Pa80 with a master keyboard.
Master Kbd Select this setting when you are connecting a
mute master keyboard.
Sequencer 1 This setting is for playing a Song (Sequencer 1)
with an external instrument sounds, or for lis-
tening to a Song performed by an external
sequencer using Pa80 as a sound generator.
Each track (S1 Tr1-16) corresponds to a MIDI
channel with the same number (1-16).
Sequencer 2 As above, but with Sequencer 2.
Accordion 1...3
Select one of these settings when connecting a
MIDI Accordion.
Ext.Seq This setting is for programming a Song on an
external sequencer.
PAGE 6 - MIDI CONTROLS
This page lets you program general MIDI parameters.
Gbl:MIDI Ctl
Local:On
Clock:Internal
Clock Send:Off
To Host rate:31.25k-Mac
Local
The Local parameter turns the keyboard on or off.
16-3
Page 3 - Video Interface
Accordion1
Accordion2
Accordion3
Ext.Seq