Import Grv - Korg PA 80 User Manual

10-18 Style Record mode
Page 14 - Import GRV
T (Tension)
Tension adds notes (a 9th, 11th and/or 13th) that have actu-
ally been played to the accompaniment, even if they haven't
been written in the Style pattern. This parameter specifies
whether or not the Tension included in the recognized chord
will be added to the Acc1-5 tracks.
On The Tension will be added.
Off No Tension will be added.
PAGE 14 - IMPORT GRV
The Impot Groove function allows the loading of ".GRV" files
generated by the Slice function (see "Page 2 - Time Slice" on
page 15-3). By importing these data to a track, and assigning
the Program based on the sliced samples to the same track,
you can play the original audio groove, and change its tempo.
Edit:Import GRV
From:MYGROOVE.GRV
to:V1-CV1
Trk: PERC
Note: The parameters of this page are "ghosted", and are not
accessible when no card is inserted. The <empty> remark is
given as the "From" value.
From:<empty>
Note: After importing a groove generated by a melody line (not
by a percussive groove), the imported groove and samples will
not be transposed together with the other Style tracks. Audio
data cannot be transposed by the automatic accompaniment
engine.
From
After you insert a Flash Card, use this parameter to select one
of the generated MIDI Groove patterns (".GRV" files) that
has been saved on the card after a Time Slice operation.
To
Use this parameter to select the target Style Element and
Chord Variation.
Trk
Use this parameter to select the target track inside the
selected Chord Variation. The Percussion track is usually
suggested, since the Drum track is still suitable for standard
Drum Kit sounds (count-in, break etc.). After importing the
MIDI Groove pattern, assign the Card Program (to which the
sliced samples are assigned) to the track playing the MIDI
Groove pattern.