Korg PA 80 User Manual page 172

17-10 Disk edit environment
Page 2 - Save
Once you have selected the type of data required, press
4.
F2 (Save) to confirm the selection. You are prompted to
select a target device.
Disk:Save
Use F1 to select
a target device.
-- SAVE
Select the target device, using the F1 button. You can
5.
select a device in this order: HD ➛ FD ➛ CRD ➛ HD...
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
After selecting a target device, the content of the selected
6.
device appears.
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET
FD SAVE
At this point, you can:
• Create a new ".SET" folder (see "Creating a new ".SET"
folder" on page 17-12).
• Save onto an existing ".SET" folder.
7. If you are saving into an existing folder, move the
desired ".SET" folder to the first line of the display, using
the E-H (Scroll) buttons (or the TEMPO/VALUE con-
trols).
8. Once the target folder is selected, press F2 (Save) to save
the files. The "Are you sure?" message will appear. Press
ENTER to confirm, or EXIT to abort.
Warning: After confirming, all data in the target folder is
deleted.
When the operation is completed (the "Wait" indicator
disappears), the source page comes back in the display,
and you may perform further saving operations.
Saving a single bank
You can save a single User bank with a single operation. A
bank corresponds to a button on the control panel of the
instrument (i.e. a button of the STYLE section).
If saving on a floppy disk, insert the disk into the disk
1.
drive.
The whole content ("All") of the internal memory is
2.
already selected. Press F3 (Open) to open the "All"
OPEN CLOSE
|
OPEN CLOSE
folder. A list of User data types appear (each type is a
separate folder).
Disk:Save
GLOBAL
PERFORM
PROGRAM
FD SAVE
Use the E-H (Scroll) buttons (or the TEMPO/VALUE
3.
controls) to move the data type you are looking for to
the first line of the display.
Once the data type is selected, press F3 (Open) to open
4.
the folder and gain access to the separate banks.
Disk:Save
USER01.STY
USER02.STY
USER03.STY
FD SAVE
Use the E-H (Scroll) buttons (or the TEMPO/VALUE
5.
controls) to move the bank to save to the first line of the
display.
Once you have selected the bank that you want to save,
6.
press F2 (Save) to confirm the selection. You are
prompted to select a target device.
Disk:Save
Use F1 to select
a target device.
-- SAVE
Select the target device, using the F1 button. You can
7.
select a device in this order: HD ➛ FD ➛ CRD ➛ HD...
Device Type
HD Hard disk
FD Floppy disk
CRD Flash Card
After selecting a target device, the content of the selected
8.
device appears.
Disk:Save
NEW_NAME.SET
LIVE.SET
ETHNICA.SET
FD SAVE
|
|
OPEN CLOSE
|
|
OPEN CLOSE
OPEN CLOSE
|
OPEN CLOSE