Playing a Song from a card
10 Listen to the Song.
When back in the Backing Sequence Play page, press PLAY/
STOP (SEQ1) to listen to the new Song. How smart were you?
If the Song is fine, you can switch to the Song mode and do
some editing. Or you can save it (as seen below), and play it
in Song Play mode.
11 Deleting one of the tracks, or the whole Song
and record again.
Press RECORD to enter Record mode.
Set the track to delete and set the REC status to record.
Set the track you want to listen to during recording to
PLAY status. If you don't want to delete it, but you don't
want to listen to it, set the track to MUTE status.
Start recording again. If you are recording the RT track,
you can't use the Style controls.
Press PLAY/STOP (SEQ1) to finish the Song and exit
12 Time to save your Song.
If you don't save your Song, it will be lost when you turn the
instrument off, or switch to the Song Play mode. You must
save to a card any Song you wish to preserve.
Insert your SD card into the card slot.
In the Backing Sequence Play page, select the ʺSave
Press the [F‐1] button to select the SD card (SD).
Move the folder where you wish to save your Song to
the first line of the display, using the E–F (Scroll Up) and
G–H (Scroll Down) VOLUME/VALUE buttons, or the
TEMPO/VALUE controls. Press F‐3 (OPEN) to open it.
Close the current folder by pressing F‐4 (CLOSE).
To create a new file, move the "NEW_NAME.MID" item to
the first line of the display.
When the "NEW_NAME.MID" item is selected, press
one of the A VOLUME/VALUE buttons. You are
prompted to assign a name to the new folder:
Move the cursor using the DOWN/‐ and UP/+ buttons.
Select a character using the DIAL. Insert a character at
the cursor position by pressing the INSERT button.
Delete a character at the cursor position by pressing the
When you have finished writing a name for the new
midifile, press F‐2 (SAVE) to confirm. The "Are you
sure?" message will appear. Press ENTER to confirm, or
EXIT to abort.
PLAYING A SONG FROM A CARD
Insert the card containing the Song into the
Press the SONG PLAY button to access the
Song Play mode.
Press the A (S1:) VOLUME/VALUE button to
open the Song Select window.
Note: You can also access the Song Select window by pressing
the PAGE+ button from the main page. You can exit this win‐
dow either by pressing EXIT or PAGE‐.
Press the F-1 button to select the SD card (SD).
The card content appears.