Korg PA 80 User Manual page 80

10-14 Style Record mode
Event Edit procedure
display (see "Page 5 - Event Filter" on page 10-13 for
more information).
Edit: Ev. Filter
Note: Off
Prog: Off
Ctrl: Off
T/Meter: Off SysEx: Off
Press PAGE- to go back to the Event Edit page.
6.
7. Press the A VOLUME/VALUE button (Trk), to select the
track to edit. The Go To Track window appears.
Go to Track: DRUM
Enter=Ok
Use the TEMPO/VALUE controls to select a track, and
press ENTER to confirm (or EXIT to abort).
8. The list of events contained in the selected track (in the
Style Element and Chord Variation selected on step 2)
will appear in the display. The first step, or Measure
Start, is currently shown. Since it contains an initializa-
tion event, it is not editable and appears "in grey" (i.e.,
written with a "ghost" character).
Position: 001.01.000
Ev: Ctrl
9. Press one of the H VOLUME VALUE buttons (Scroll
Down arrow), to go to the next step. This is usually a
note, that you can edit.
Event Edit
Trk: DRUM
Position: 001.01.000
Ev: Note
Lenght:000.00.000
For more information on the event types and their val-
ues, see "Page 4 - Event Edit" on page 10-12.
10. Use the B VOLUME/VALUE buttons to select the Posi-
tion line. Use these buttons or the TEMPO/VALUE con-
trols to change the event's position.
Position: 001.01.001
Measure
Use the C VOLUME/VALUE buttons to select the Event
11.
line. You may use the C VOLUME/VALUE buttons or
the TEMPO/VALUE controls to change the event type.
Use the G VOLUME/VALUE buttons, and the F3 and F4
function keys to respectively select the first and second
value of the parameter. Use the G VOLUME/VALUE
Aftt: Off
PAft: Off
Bend: Off
Exit=Cancel
|
11 110
|
E:V1 CV:CV1
|
F#2 72
|
Beat Tick
buttons or the TEMPO/VALUE controls to modify the
selected value.
Ev: Note
Event Type First value
12. If a Note event is selected, use the D VOLUME/VALUE
buttons to select the Length line, and use the same but-
tons, or the TEMPO/VALUE controls, to change the
event's length.
Lenght:000.00.000
Measure
• After having modified the shown event, you may scroll
to the next event with the H VOLUME/VALUE buttons
(Scroll to next), or to the previous event with the E/F
VOLUME/VALUE buttons (Scroll to previous).
• You may use the SHIFT + << or >> shortcut to go to a
different measure (see "SHIFT + << or >>" on page 10-
13)
• As described in step 4, you may press START/STOP
and play some chords to listen how the pattern sounds
after your changes. Press START/STOP again to stop the
pattern running.
Use the INSERT button to insert an event at the Position
13.
shown in the display (a Note event with default values
will be inserted). Use the DELETE button to delete the
event shown in the display.
When the editing is complete, you may select a different
14.
track (go to step 7), or a different Style Element and
Chord Variation (press EXIT to go back to the Main
page of the Style Record mode, then go to step 2).
15. When finished editing the whole Style, press WRITE to
open the Write Style page.
WRITE to:
Style name: Groove Bld
To: U01-01
Abort
• Use the A or E VOLUME/VALUE buttons to enter the
Text Editing mode. Use the UP and DOWN buttons to
move the cursor, and the dial to select a character.
• Use the B VOLUME/VALUE buttons to select a target
location. The name of the Style already existing at the
selected location is shown after the Style Bank-Location
number.
Warning: If you select an existing Style and confirm writ-
ing, the older Style is deleted and replaced by the new one.
Save the Styles you don't want to loose on disk, before over-
writing them.
16. Press ENTER to save the Style to the internal memory,
or one of the D VOLUME/VALUE buttons (Abort) to
delete any changes made in Style Record mode. When
F#2 72
Second value
Beat Tick
Foxtrot 3