Digital Clock; Multi-Functional Indicator (Onboard Computer) - Skoda roomster Owner's Manual

Hide thumbs Also See for roomster:
Table of Contents

Advertisement

affix the sticker with the entry of the following service interval to the
side of the dash panel on the driver's side.
The Service Interval Display can also be reset with the reset button
follows:
Switch off the ignition, press the reset button of the trip counter for
distance driven and hold it down.
Switch the ignition on and release the reset button. Now turn the reset
button to the right. The service interval display is reset.
Caution
We recommend that you do not reset the Service Interval Display yourself
otherwise this can result in the service interval display being incorrectly
set, which may also result in problems with operation of your vehicle.
Note
Never reset the display between service intervals otherwise this may
result in incorrect readouts.
information is retained in the Service Interval Display also after the
battery of the vehicle is disconnected.
it is necessary to re-code the Service Interval Display if a new instru-
ment cluster is installed during repair work. This work is carried out by a
specialist garage.
The data displayed is the same after resetting the display with flexible
service intervals (QG1) using the reset button as that for a vehicle with
fixed service intervals (QG2). We therefore recommend having the
Service Interval Display reset only by a Škoda Service Partner who is
familiar with the procedure for resetting the display with a vehicle system
tester.
Please refer to the brochure Service schedule for extensive informa-
tion about the service intervals.
Using the system
Safety

Digital clock

A
as
6
A reset button is installed on the left below beside the speedom-
eter for adjusting the clock
Set hours
– Turn the reset button to the left.
Setting minutes
– Turn the reset button to the right.
The clock should not be adjusted while driving for safety reasons
but only when the vehicle is stationary.
Multi-functional indicator (onboard
computer)*
Introduction
The multi-functional indicator appears in the display
in the information display
fitted to your vehicle.
The multi-functional indicator offers you a range of useful information
Driving Tips
General Maintenance
Instruments and Indicator/Warning Lights
⇒ page 13, fig.
WARNING
⇒ page 22, fig. 8
Breakdown assistance
2.
⇒ page 18, fig. 5
or
depending on the equipment
Technical Data
17

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents