Honda tourer Owner's Manual page 59

06/09/21 10:00:46 32SED640_059
Protecting Children
ATTACHING CLIP
ANCHOR FITTING
Attach the attaching clip to the
anchor fitting as shown in the
illustration, then tighten the strap
according to the child restraint
system maker's instructions. Make
sure the strap is not twisted.
The above illustration shows how
the attaching clip should be routed in
EU countries.
56
Driver and Passenger Safety
On some models
To use an anchor point, lift the rear
head restraint, then route the tether
strap over the seat-back between the
legs of the head restraint.
To attach the tether to the child
restraint system, follow the child
restraint system maker's instructions.
When the child restraint system is
used, follow the instructions that
came with the child restraint system.
WARNING: Child restraint anchorages
are designed to withstand only those
loads imposed by correctly fitted child
restraints. Under no circumstances are
they to be used for adult seat belts,
harnesses or for attaching other items
or equipment to the vehicle.