Honda tourer Owner's Manual page 420

06/09/21 10:49:54 32SED640_420
1. Run the engine until it reaches
normal operating temperature,
then shut it off.
The oil, engine components
and the exhaust system are
hot and can burn you.
Use caution and wear
protective clothing while
working in the engine
compartment.
2. Open the bonnet and remove the
engine oil fill cap.
BOLT
LID
3. Remove the bolt with a wrench,
then remove the maintenance lid
under the vehicle.
Engine Oil (Petrol models)
OIL DRAIN BOLT
WASHER
Remove the oil drain bolt and
washer from the bottom of the en-
gine. Drain the oil into an appropri-
ate container.
CONTINUED
Maintenance
417