Honda tourer Owner's Manual page 144

06/09/21 10:12:44 32SED640_144
To replace the battery:
1. Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
2. Separate the transmitter by prying
its middle seam with your
fingernail.
BATTERY
SCREW
3. Inside the transmitter, separate
the inner cover from the keypad
by releasing the two tabs on the
cover.
4. Remove the old battery from the
back of the inner cover, and note
the polarity. Make sure the
polarity of the new battery is the
same ( side facing down), then
insert it into the back of the cover.
5. Install the parts in reverse order.
An improperly disposed of battery
TAB
can hurt the environment.
Always confirm local regulations for
battery disposal.
Instruments and Controls
Keys and Locks
CONTINUED
141