Honda tourer Owner's Manual page 508

06/09/21 11:02:25 32SED640_508
JACKING POINT
9. Locate the jacking point nearest
the tyre you need to change. Place
the jack under the jacking point.
Turn the end bracket clockwise
until the top of the jack contacts
the jacking point. Make sure the
jacking point tab is resting in the
jack notch.
WHEEL NUT WRENCH EXTENSION
10. Use the extension and wheel nut
wrench as shown to raise the
vehicle until the flat tyre is off the
ground.
Changing a Flat Tyre
WHEEL NUTS
WHEEL
NUTS
WHEEL COVER
11. Remove the wheel nuts and wheel
cover (on some types). Handle the
wheel nuts carefully; they may be
hot from driving. The wheel cover
cannot be removed without first
removing the wheel nuts. Do not
attempt to forcibly pry the wheel
cover off with a screwdriver or
other tool.
CONTINUED
Taking Care of the Unexpected
505