Honda tourer Owner's Manual page 341

06/09/21 10:39:03 32SED640_341
Hands-Free Telephone (HFT) System (For some types)
2. Press and release the Talk button.
After the beep, say ''List.'' The
HFT system responds by listing
the names in the phonebook.
When the end of the list is
reached, the HFT system
response is, ''The entire list has
been read. Returning to the main
menu.''
To call a name from the phonebook list,
do this:
1. Press and release the Talk button.
After the beep, say ''Phonebook.''
The HFT system response is
''Phonebook options are store, edit,
delete, and list.''
2. Press and release the Talk button.
After the beep, say ''List.'' The
HFT system responds by listing
the names in the phonebook.
When it says the name you want to
call, for example, Eric, press the
Talk button, and then say ''Call.''
The HFT system response is,
338
Comfort and Convenience Features
''Would you like to call Eric?''
3. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFT system response is ''Calling.''
Once connected, you will hear the
person you called through the
audio speakers. To change the
volume, use the audio system
volume knob.
Clearing the System
This operation clears the HFT
system of your password, your
paired phones, and all names in the
HFT system phonebook. Clearing is
recommended before you sell your
vehicle.
To clear the system, do this:
1. Press and release the Talk button.
After the beep, say ''System.'' The
HFT system response is, ''System
options are setup and clear.''
2. Press and release the Talk button.
After the beep, say ''Clear.'' The
HFT system response is, ''This
process will clear all paired phones,
clear all entries in the phonebook,
and clear the password and
restore the defaults in the system
setup. Is this what you would like
to do?''
3. Press and release the Talk button.
After the beep, say ''Yes.'' The
HFT system response is
''Preparing to clear all paired
phones, all phonebook entries, and
the password, and restore the
defaults in the system setup. This
may take up to 2 minutes to
complete.'' Say ''OK'' to proceed,
otherwise say ''Go back'' or
''Cancel.''
4. If you said ''OK,'' after a short
period of time, the HFT system
response is, ''System has been
cleared. Returning to the main
menu.''