The Maintenance Schedule Shows; Engine Oil (Diesel Models); Adding Oil; Recommended Oil - Honda tourer Owner's Manual

06/09/21 10:50:14 32SED640_422

Adding Oil

ENGINE OIL FILL CAP
To add oil, unscrew and remove the
engine oil fill cap on top of the valve
cover. Pour in the oil, and install the
engine oil fill cap. Tighten it securely.
Let the engine warm up and turn off
the engine, let it sit for
approximately 3 minutes, then check
the oil level. Do not fill above the
upper mark; you could damage the
engine.
Pour the oil slowly and carefully so
you do not spill any. Clean up any
spills immediately. Spilled oil could
damage components in the engine
compartment.

Recommended Oil

Always use a synthetic motor oil that
meets the ACEA specifications, and
is the proper weight as shown in the
following chart. When using
synthetic oil, you must follow the oil
and filter change intervals given in
the maintenance schedule.
It is highly recommended that you
use genuine Honda Motor oil or
0W-30 synthetic motor oil meeting
the minimum specification: ''ACEA A
1/B1,'' ''ACEA A3/B3,'' or ''ACEA A
5/B5.''

Engine Oil (Diesel models)

You can select the proper ACEA
viscosity oil for your vehicle
according to this chart:
Ambient Temperature
NOTE: 0W-30 oil is formulated to
improve fuel economy.
Maintenance
419