Honda tourer Owner's Manual page 282

06/09/21 10:30:04 32SED640_282
Operation
Select the CD changer by pressing
the CD button. You will see ''CD'' in
the upper display. The system will
begin playing the last selected disc in
the CD changer. You will see the
disc and track numbers displayed.
When that disc ends, the next disc in
the CD changer is loaded and played.
After the last disc finishes, the
system returns to disc one.
To select a different disc, touch the
appropriate disc icon (1
press the upper side ( ) or the
lower side ( ) of the DISC bar next
to the audio display. If you select an
empty position in the CD changer,
the system will go into the loading
sequence (see page 277
You can use the SKIP bar while a
disc is playing to select passages and
change tracks.
To move rapidly within a track, press
and hold the top or bottom of the
SKIP bar. You will hear a beep and
the system will continue to move
through the track. Press
move forward, or
backward. Release the bar when the
system reaches the point you want.
Each time you press and release the
6) or top of the SKIP bar, the system
skips forward to the beginning of the
next track. Press and release the
bottom to skip backward to the
beginning of the current track. Press
it again to skip to the beginning of
). the previous track.
Audio System (C Type)
Track Scan
When you touch the TRACK SCAN
icon on the audio display, the first
track of the current CD plays for
about 10 seconds. You will see
TRACK SCAN highlighted in the
display (or SCAN in the upper
display). To hear the rest of the
to track, touch TRACK SCAN again,
to move within 10 seconds. If you don't, the
system advances to the next track,
plays about 10 seconds of it, and
continues through the rest of the
tracks the same way.
Comfort and Convenience Features
279