Honda tourer Owner's Manual page 177

06/09/21 10:17:12 32SED640_177
Mirrors
For some types
INDICATOR
BUTTON
The inside mirror can automatically
darken to reduce glare. To turn on
this feature, press the button on the
bottom of the mirror. The AUTO
indicator comes on as a reminder.
When it is on, the mirror darkens
when it senses the headlights of a
vehicle behind you, then returns to
normal visibility when the lights are
gone. Press the button again to turn
off this sensing.
174
Instruments and Controls
Adjusting the Power Mirrors
ADJUSTMENT KNOB
SENSOR
Adjust the outside mirrors with the
adjustment knob on the driver's door
armrest:
1. Turn the ignition switch to the ON
(II) position.
2. Move the selector switch to L (left
side) or R (right side).
ADJUSTMENT KNOB
3. Push or pull the adjustment knob
in the appropriate direction to
move the mirror right, left, up, or
down.
4. When you finish, turn the
adjustment knob to the centre
(off) position. This turns off the
adjustment knob so you can't
move a mirror out of position by
accidentally bumping the switch.