Honda tourer Owner's Manual page 481

06/09/21 10:58:50 32SED640_481
Lights
BULB
Diesel models
SOCKET
3. Pull the bulb straight out of its
socket.
Push the new bulb straight into
the socket until it bottoms.
4. Insert the socket back into the
headlight assembly. Turn it
clockwise to lock it in place.
5. Turn on the lights to make sure
the new bulb is working.
478
Maintenance
Replacing a Front Position Light
Bulb
1. If you are changing the bulb on
the left side, start the engine, turn
the steering wheel all the way to
the right, and turn off the engine.
If you are changing the bulb on
the right side, turn the steering
wheel to the left.
HOLDING CLIPS
2. Use a flat-tipped screwdriver to
remove the two holding clips from
the inner fender.
3. Pull the inner fender cover back.
4. Remove the socket from the
headlight assembly by turning it
one-quarter turn anticlockwise.