Honda tourer Owner's Manual page 110

06/09/21 10:08:08 32SED640_110
Pre-Running Car Detect Beep
When PRE-RUNNING CAR
DETECT BEEP is set to ON, one
beep sounds when the ACC detects a
vehicle in front of you. You also hear
a beep when that vehicle goes out of
the range of your vehicle's radar
sensor.
Press the SEL/RESET button. The
display changes as shown in the
previous column. Select ON or OFF
by pressing the INFO button, then
press the SEL/RESET button to
enter your selection.
When your choice is set, the display
shows ''SETUP ON'' for several
seconds, and then returns to the
CUSTOMIZE MENU screen.
To exit this mode without changing
the current setting, select
and press the SEL/RESET button.
Multi-Information Display
Adaptive Cruise Control Display Speed
Unit
,
To change the speed unit
measurement, do this:
Instruments and Controls
CONTINUED
107