Honda tourer Owner's Manual page 526

06/09/21 11:04:45 32SED640_526
3. Insert the hose through the valve
hole into the tyre.
The hose should enter the sealant
as deeply as possible.
4. Squeeze the bottle and draw out
the sealant.
(It is better to stand a tyre on a
table.)
5. Repeat step 4 until the sealant
cannot be drawn out.
6. Bend the hose and tie it with the
strap or tape so that sealant does
not leak. Dispose of the bottle at
your Honda dealer when you
replace it with a new bottle.
Honda IMS (For some types)
Recycling sealant is important for
protecting environmental resources.
Please cooperate in collecting used
sealant.
CONTINUED
Taking Care of the Unexpected
523