Honda tourer Owner's Manual page 58

06/09/21 10:00:38 32SED640_058
ANCHOR POINTS
ANCHOR FITTING PLASTIC COVER
The anchor fittings are located
under the plastic covers. To access
the anchor fitting, remove the
tonneau cover (see page
remove the plastic cover on the seat-
back.
To use an anchor point, push the
release lever on the seat-back
forward, then remove the rear head
164 ), then restraint on the seating position you
want to use (see page
removed head restraint should be
secured so it will not be thrown while
you are driving. Make sure to
replace the rear head restraint when
the child restraint system is not in
use.
To reinstall the rear head restraint,
push the release lever forward, then
push in the head restraint until you
hear a click.
Pushing the release lever unlocks
the seat-back. After removing or
reinstalling the rear head restraint,
push the seat-back firmly against its
latch to lock it upright. Tug on the
seat-back to ensure that it is latched.
RELEASE LEVER
Make sure the seat-backs are
latched securely before
driving.
158 ). The
Driver and Passenger Safety
Protecting Children
CONTINUED
55