Table of Contents
Advertisement
NPort IA5150/5250 Series User's Manual
Product Features
NPort IA5150/5250 Series device servers have the following features:
Make your serial devices Internet ready
Versatile socket operating modes, including TCP Server, TCP Client, UDP, and Real COM
driver
2- or 4-wire RS-485 with patented ADDC™ (Automatic Data Direction Control)
Slim type, inch-wide industrial strength casing
DIN-Rail or wall mountable
Built-in Ethernet cascading ports for easy wiring (RJ45 only)
Redundant dual DC power inputs
Warning by relay output and E-mail
10/100BaseTX (RJ45) or 100BaseFX (SC connector, Single/Multi mode) available
IP30
Product Specifications
NPort IA5150-M-SC/5150I-M-SC/5150-S-SC/5150I-S-SC LAN
Ethernet Port
NPort IA5150/5150I/5250 LAN
Ethernet Switch Ports
Protection
Optical Fiber
Distance
Min. TX Output
Max. TX Output
Sensitivity
NPort IA5150 Series Serial Interface
Interface
No. of Ports
Port Type
Signals
Serial Line Protection
1 100BaseFX port (SC connector)
2 10/100BaseT(X) ports (RJ45 connector)
Built-in 1.5 KV magnetic isolation
Multi mode: 0 to 2 km, 1310 nm (62.5/125 μm, 500 MHz*km)
Single mode: 0 to 40 km, 1310 nm (9/125 μm, 3.5 PS/(nm*km)
Multi mode: -20 dBm
Single mode: 0 to 40 km, -5 dBm
Multi mode: -14 dBm
Single mode: 0 to 40 km, 0 dBm
-36 to -32 dBm (Single), -34 to -30 dBm (Multi)
RS-232/422/485
1
Male DB9 for RS-232;
5-pin terminal block for RS-422/485
RS-232
TxD, RxD, RTS, CTS, GND, DTR, DSR,
DCD
RS-422:
Tx+, Tx-, Rx+, Rx-, GND
RS-485 (2-wire):
Data+, Data-, GND
RS-485 (4-wire):
Tx+, Tx-, Rx+, Rx-, GND
15 KV ESD for all signals
1-3
Introduction
Advertisement
Table of Contents
