GREAT PLANES Performance Reactor Instruction Manual page 35

Performance series almost ready-to-fly 1.60 glow/43 cc gas sport aerobat

Hide thumbs Also See for Performance Reactor:

Table of Contents

Enlarged version

❏

3. Remove the mufﬂ er while leaving the template in place.

❏

4. Locate the wood parts shown.

❏

5. Build the inside portion and the outside portion of cowl

centering tool as shown. Use medium CA to glue them together.

❏

6. Fit the cowl centering tool to the cowl as shown. Use

only two small drops of medium CA to tack the inside and

the outside pieces together so that you can remove them

easily later.

❏

7. Fit the cowl to the plane so that the cowl centering tool

bottoms out on the engine's drive washer. Position the paper

template and trace the mufﬂ er cutout onto the cowl using a felt-

tip pen.

❏

8. Trim the clearance hole for the mufﬂ er. Reinstall your

mufﬂ er and check the ﬁ t.

Table of Contents