Transceivers, Connectors, And Cables Used With Each I/O Module - Cisco Nexus 7706 Hardware Installation Manual

Switch Specifications
Transceivers, Connectors, and Cables Used with Each I/O
Module
Table 3: F3 Series 48-port, 1- and 10-Gigabit Ethernet (N77-F348XP-23) Transceivers and Cables
Port Type
FET
SFP+
2 FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Table 4: F3 Series 24-port, 40-Gigabit Ethernet (N77-F324FQ-25) Transceivers and Cables
Port Type
FET
OL-31330-01
Transceiver or Connector
FET-10G
SFP-10G-SR
SFP-10G-LRM
DWDM-SFP10G-xx.xx
SFP-10G-ER
SFP-10G-LR
SFP-10G-LRM
SFP-10G-ZR
SFP-H10GB-CU1M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
Transceiver or Connector
FET-40G

Transceivers, Connectors, and Cables Used with Each I/O Module

Cable Type
10-Gigabit Fabric Extender Transceiver
(FET) for FEX connections
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
Twinax cable assembly, passive
Twinax cable assembly, active
Cable Type
40-Gigabit Fabric Extender
Transceiver (FET) for FEX
connections
Cisco Nexus 7706 Hardware Installation Guide
2
3
99