100-Gb Cpak Transceiver Specifications - Cisco Nexus 7706 Hardware Installation Manual

100-Gb CPAK Transceiver Specifications

Port Type
QSFP+
3 FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Table 5: F3 Series 12-port, 100-Gigabit Ethernet (N7K-F312CK-26) Transceivers and Cables
Port Type
CPAK
100-Gb CPAK Transceiver Specifications
The 100-Gigabit CPAK transceivers are used with the F3-Series 100-Gigabit I/O module (N77-F312CK-26).
Cisco Nexus 7706 Hardware Installation Guide
100
Transceiver or Connector
QSFP-40G-CSR4
QSFP-40G-SR4
QSFP-40G-SR-BD
QSFP-40G-LR4
QSFP-H40G-ACU7M
QSFP-H40G-ACU10M
QSFP-4X10G-AC7M
QSFP-4X10G-AC10M
QSFP-H40G-AOC1M
QSFP-H40G-AOC2M
QSFP-H40G-AOC3M
QSFP-H40G-AOC5M
QSFP-H40G-AOC7M
QSFP-H40G-AOC10M
QSFP-4X10G-AOC1M
QSFP-4X10G-AOC2M
QSFP-4X10G-AOC3M
QSFP-4X10G-AOC5M
QSFP-4X10G-AOC7M
QSFP-4X10G-AOC10M
Transceiver or Connector
CPAK-100G-SR10
CPAK-100G-LR4
Switch Specifications
Cable Type
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
Direct attach copper, active
40GBASE-CR4 QSFP+ to four
SFP+ Twinax direct attach copper
breakout cable actve
40GBASE-AOC (Active Optical
Cable) QSFP+ cable
40GBASE-AOC QSFP+ to four
SFP+ breakout cable
Cable Type
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
OL-31330-01