Rj-45 Module Connectors - Cisco Nexus 7706 Hardware Installation Manual

Switch Specifications
Transceiver
Type
1000BASE-LX
(GLC-LH-SMD)
1000BASE-ZX
(GLC-ZX-SMD)
1000BASE-T
(GLC-T and
SFP-GE-T)
6 Single-mode fiber optic (SMF)
7 ITU-T G652 SMF as specified by the IEEE 802.32 standard.
8 Multimode fiber optic (MMF)
9 You must use a mode-conditioning patch cord, as specified by the IEEE standard, regardless of the amount of span.
The transceivers that support Digital Optical Monitoring have a greater range of temperatures for operations,
as shown in the following table.
Transceiver Type
1000BASE-SX
1000BASE-LX
1000BASE-ZX
1000BASE-T
10 Extended (EXT) temperature range is 23 to 185°F (-5 to 85°C)

RJ-45 Module Connectors

The RJ-45 connector connects Category 3, Category 5, Category 5e, Category 6, or Category 6A foil twisted-pair
or unshielded twisted-pair cable from the external network to the following module interface connectors:
• Supervisor modules
OL-31330-01
Cable Type Connector Wavelength
Type (nm)
3
MMF LC duplex 1310
1
SMF LC duplex 1310
1
SMF LC duplex 1550
Category 5, RJ-45 —
5E, or 6
UTP/FTP
Part Number Digital Optical
Monitoring Support
GLC-SX-MMD Yes
GLC-LH-SMD Yes
GLC-ZX-SMD No
GLC-T —
SFP-GE-T —
RJ-45 Module Connectors
Core Size Modal
(microns) Bandwidth
(MHz-km)
62.5 500
50.0 400
50.0 500
2
G.652 —
2
G.652 —
— —
Operating
Temperature
10
EXT
5
EXT
6
COM
6
COM
5
EXT
Cisco Nexus 7706 Hardware Installation Guide
Maximum Cable
Distance
9
1804 feet (550 m)
4
1804 feet (550 m)
4
1804 feet (550 m)
6.2 miles (10 km)
Approximately 43.4
to 60 miles (70 to
100 km) depending
on link loss
328 feet (100
meters)
Storage
Temperature
–40 to 185°F (–40
to 85°C)
111