Transceivers, Connectors, And Cables Used With Each I/O Module - Cisco Nexus 7706 Hardware Installation Manual

Transceivers, Connectors, and Cables Used with Each I/O Module

Transceivers, Connectors, and Cables Used with Each I/O
Module
Table 5: F3 Series 48-port, 1- and 10-Gigabit Ethernet (N77-F348XP-23) Transceivers and Cables
Port Type
FET
SFP+
2
Table 6: F3 Series 24-port, 40-Gigabit Ethernet (N77-F324FQ-25) Transceivers and Cables
Port Type
FET
Cisco Nexus 7706 Hardware Installation Guide
120
Transceiver or Connector
FET-10G
SFP-10G-SR
DWDM-SFP10G-xx.xx
SFP-10G-ER
SFP-10G-LR
SFP-10G-LRM
SFP-10G-ZR
SFP-H10GB-CU1M
SFP-H10GB-CU1-5M
SFP-H10GB-CU2M
SFP-H10GB-CU2-5M
SFP-H10GB-CU3M
SFP-H10GB-CU5M
SFP-H10GB-ACU7M
SFP-H10GB-ACU10M
SFP-10G-AOC1M
SFP-10G-AOC3M
SFP-10G-AOC5M
SFP-10G-AOC7M
SFP-10G-AOC10M
FETs are used only when connecting this I/O module to a Fabric Extender (FEX).
Cable Type
10-Gigabit Fabric Extender Transceiver
(FET) for FEX connections
Multi-mode fiber (MMF)
Single-mode fiber (SMF)
Twinax cable assembly, passive
Twinax cable assembly, active
Active optical cable assembly
Transceiver or Connector
FET-40G
Switch Specifications
2
Cable Type
40-Gigabit Fabric Extender
Transceiver (FET) for FEX
3
connections
OL-31330-01