Cisco Nexus 7706 Hardware Installation Manual page 14

Overview of the Cisco Nexus 7706 Switch Installation Features
1 Three fan trays (only two are shown in this
figure—one is removed to show the two fabric
modules in back) (N77-C7706-FAN)
2 Fabric modules (up to six with two behind each
fan tray) (N77-C7706-FAB-2)
3 LEDs for the fan tray and fabric modules behind
the fan tray
The following figure shows the optional features seen on the front of the Cisco Nexus 7706 chassis.
Figure 3: Optional Hardware Features on the Front of the Cisco Nexus 7706 Chassis
1 Front doors with locks (N77-C7706-FDK)
Cisco Nexus 7706 Hardware Installation Guide
4
4 Handles used only for adjusting the position of
the chassis on the mechanical lift or on the
bottom support rails (do not lift the chassis with
these handles)
5 Vertical mounting brackets used for securing
the chassis to the rack and for holding the cable
management frames
2 Air filter (N77-C7706-AFLT) shown on the
outside of the cable management frames. Filters
also included inside and on the sides of the front
door (not shown).
Overview
OL-31330-01