Fuses; Tool Box; Rewind Starter Handle; Dipstick - BOMBARDIER outlander series Operator's Manual

1
V07A0AZ
1. Radiator cap

21) Fuses

The electrical system is protected with
fuses. Refer to MAINTENANCE for
details.
The fuse holders are located in the ser-
vice compartment (behind tool box).
1
4
V07G02Y
FUSES LOCATION
1. Accessories (15 A)
2. Fan (15 A)
3. Main (20 A)
4. Charging system (30 A)

22) Tool Box

The tool box is located in the service
compartment. It contains tools for
basic maintenance, this Operator's
Guide and the ATV Winch Operator's
Manual with the XT models .
The tools included in the tool box are:
– pliers (1)
– screwdriver (1)
– open wrench 10/13 mm (1)
– open wrench 15/17 mm (1)
– socket wrench 10/13 mm (1)
– socket wrench 16/18 mm (1)
– tire pressure gauge (1)
– Allen key 3 mm (1)
– shock absorber key (1)
– fuse 30 A (1)
– fuse 20 A (1)
– fuse 15 A (1).

23) Rewind Starter Handle

The rewind starter handle is provided
as an emergency starting device.
Follow the usual starting procedure;
but use the rewind starter instead of
the electric starter.
Located on right side of vehicle.
3
Auto-rewind type. To engage mecha-
nism, pull handle slowly until a resis-
tance is felt then continue to slowly
pull the handle until the compression
stroke peak (strong rotating resis-
tance) is overpassed then, pull vigor-
ously. Slowly release handle.
2
V07C01Y
1. Rewind starter handle

24) Dipstick

Located on the right side of engine.
Allow to check the oil level in the en-
gine.
_____________________
1
75