Can-Am DS 650 X Operator's Manual page 97

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
PART/TASK
STEERING
Handlebar fasteners (3)
Throttle/housing/cable (3)
(3) (4)
Steering system
Tie rod ends
Wheel nuts/studs (3)
Tires pressure and wear
Front wheel hub
Front wheels alignment
SUSPENSION
Swing arm
Swing arm lubrication
A-arms
Ball joint boots
(4)
Ball joint
Shock absorbers
BRAKE
Brake fluid (front and rear)
(6)
Brake pads
Brake system (discs, hoses, etc.)
Brake line fittings (3)
PERIODIC MAINTENANCE CHART
I
I
I
I
I
(3)
I
I
I
I
I
(3) I
(3)
I
INITIAL INSPECTION 10 H OR 30 DAYS OR 400 KM (250 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is
very important and must not be neglected.)
25 H OR 1250 KM (800 mi)
50 H OR 2500 KM (1600 mi)
100 H OR 1 YEAR OR 5000 KM (3100 mi)
200 H OR 2 YEARS OR 10000 KM (6200 mi)
I Dealer
I Customer
I Dealer
I Customer
I Customer
EVERY RIDE Customer
EVERY RIDE Customer
I
Dealer
I Customer
EVERY RIDE Customer
I,
Customer
L
I Customer
I Dealer
I Customer
R
I Customer
(6)
I Customer
I Customer
EVERY RIDE Customer
_____________________
TO BE PERFORMED BY
LEGEND
(3) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.
(3) Pre-ride inspection item.
(6) Brake fluid replacement or
any brake system repairs must
be performed by an authorized
Can-Am dealer.
95