Can-Am DS 650 X Operator's Manual page 109

2
V02A06Y
1. Lens
2. Screws
Push bulb in and hold while turning
counterclockwise to release.
Install the new bulb by first pushing in
while turning clockwise.
Auxiliary Headlight
Disconnect the auxiliary headlight
then remove it from support.
V02G0NY
1. Auxiliary headlight
2. Support
Remove the back cover of auxiliary
headlight.
1 2
1
2
_____________________
1
V02G0OY
1. Remove these screws
Remove screw retaining the BLACK
wire.
V02G0PY
Detach bulb and replace.
V02G0QY
BULB WITH WIRE ASSEMBLY
NOTE: ALWAYS USE A 35 WATTS
BULB. If a 55 watts bulb is used, the
regulator might not be able to recharge
the battery properly.
1
107