Can-Am DS 650 X Operator's Manual page 91

MODEL
LIQUIDS
Oil type
(engine and transmission)
Coolant
Fuel
Hydraulic brake
CAPACITIES
Vehicle range
Fuel tank
Engine/transmission oil
Coolant
ampere
A:
ampere hour
Ah:
cc:
cubic centimeters
cu. in.: cubic inches
hp: horsepower
Because of our ongoing commitment to product quality and innovation, BRP re-
serves the right, at any time, to make changes in design and specifications and/or
to make additions to, or improvements in its products without imposing any obli-
gation upon itself to install them on its products previously manufactured.
API classification SL or SJ.
Never use an engine oil with the
API SM or ILSAC GF-4 classification,
using these oils in Can-Am ATV
wet clutch equipped vehicles
will create clutch slippage
XP-S 5W40 synthetic oil. Do
not use other synthetic oil, synthetic
blend oil or additive in Can-Am ATV wet
clutch equipped vehicles. Refer to OIL
VISCOSITY CHART for other grade
Ethylene-glycol/water mix (50% coolant,
50% distilled water). Use BRP premixed
coolant or a coolant specially designed
Type Premium unleaded gasoline
Inside North America: (91 (RON + MON)/2)
Octane
Outside North America: 95 RON
Approximately 3 hours depending on
many factors such as temperature and
12 L (3.2 U.S. gal) including an approximate
reserve of 2.4 L (0.6 U.S. gal)
kW: kilowatt
revolution per minute
RPM:
V: volt
watt
W:
_____________________
DS 650™ X
SAE 10W40 mineral oil.
or
for aluminum engines
Brake fluid, DOT 4
operating conditions
3 L (3.2 U.S. quarts)
1.75 L (1.9 U.S. quarts)
89