Can-Am DS 650 X Operator's Manual page 96

A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
PART/TASK
ELECTRICAL SYSTEM
(5)
Spark plugs
Battery connections
Wiring harnesses, cables and lines
Condition of ignition switch, engine start
button and engine stop switch
Condition of lighting system (HI/LO intensity,
brake lamp, headlamp aiming, etc.)
DRIVE TRAIN
Drive chain lubrication (3)
Drive chain adjustment
Drive chain slider and roller condition
Sprockets (4)
Wheel bearing condition
Rear wheel hub
Rear axle tightness (eccentric axle housing
bolts and adjustment nut)
______________________
94
PERIODIC MAINTENANCE CHART
I,
A
I
I
I
(3)
I
(3)
(3)
(3)
I
(3)
I
I
INITIAL INSPECTION 10 H OR 30 DAYS OR 400 KM (250 mi)
(To be performed by an authorized Can-Am dealer. The initial maintenance is
very important and must not be neglected.)
25 H OR 1250 KM (800 mi)
50 H OR 2500 KM (1600 mi)
100 H OR 1 YEAR OR 5000 KM (3100 mi)
200 H OR 2 YEARS OR 10000 KM (6200 mi)
TO BE PERFORMED BY
R Dealer
I Dealer
I Dealer
I Customer
I Customer
EVERY RIDE Customer
EVERY RIDE Customer
EVERY RIDE Customer
I Customer
I L Customer
L Customer
I Customer
LEGEND
(3) Pre-ride inspection item.
(5) Make sure the spark plug is
correctly gapped.
(3) Pre-ride inspection item.
(4) More often under severe use
such dusty area, sand, snow,
wet or muddy conditions.