Firmware Menu; Boot:fpga:high Field; Upgrade Field; Transcoding F/W Menu - Motorola DSR-6050 Operator's Manual

Commercial integrated receiver/ transcoder

Hide thumbs Also See for DSR-6050:

Table of Contents

Firmware Menu

Press the56buttons until the Firmware menu appears. This menu displays the

DSR-6050's firmware release information, which is equivalent to the product

version number. This menu cannot be changed, but since the firmware is

periodically updated, this menu confirms that the update was successful. This menu

is used most commonly in troubleshooting.

This field displays the version of boot, FPGA, and the high code. The boot code is

loaded at the factory. The FPGA and high codes may be upgraded to later versions

by a download that is delivered over the satellite signal from either the

L-band or ASI input. The code versions are represented by a six-digit hexadecimal

number. This field is non-editable.

The Upgrade field displays the version of the upgrade code that is available. This

field displays 000000 when no upgrade code is available. Available upgrades are

installed the next time the DSR-6050 is rebooted. This field is non-editable.

Press the56buttons until the TRANSCODING F/W menu appears. This menu

displays the release information of the transcoding firmware. This menu cannot be

changed, but since the firmware is periodically updated, this menu confirms that

the update was successful. This menu is used most commonly in troubleshooting.

This field displays the version of transcoding FPGA and high code. These codes

may be upgraded to later versions by a download that is delivered over the satellite

signal from either the L-band or ASI input. The code versions are represented by a

six-digit hexadecimal number. This field is non-editable.

DSR-6050

Operating the DSR-6050

Table of Contents

Show Quick Links

Table of Contents