Panasonic KV-S3065CL SERIES Service Manual page 98

KV-S3065CLSERIES / KV-S3065CWSERIES
Phenomenon
Scanning position is
shifted
The document skews
when scanning.
Possible Cause
1. When reassembling CIS or mechanical
parts related to conveying documents, re-
adjustment has not been done.
2. When replacing CONTROL Board, CIS,
or mechanical parts related to conveying
documents, re-adjustment has not been
done.
1. Document quality is out of this
scanner's specification.
2. Rollers are dirty.
3. Rollers are not attached to the default
position, properly when assembling.
4. Rollers have reached their life
expectancy.
Check Point
Execute All Position or Individual Position test in
Sec.9.3.7 to adjust the scanning position.
Check the specification on this scanner. (See Sec.2.)
Clean the rollers. (See 7.2.)
Assemble the rollers again.
After inspecting them, replace the roller.
Fig.10.1.1
Fig.10.1.2
98
Remarks