Panasonic KV-S3065CL SERIES Service Manual page 87

9.3.6. Test
Item
LED 1. Click "LED" on the main menu.
2. Click "START" on LED dialog box to start LED
Test continuously until clicking "STOP".
3. Click "Close" to get back the main menu.
Key / Sensor 1. Click "Key / Sensor" on the main menu.
2. Check key and sensor status on the Key /
Sensor dialog box.
3. Click "Close" to get back to the main menu.
Sensor Sensitive Level 1. Click "Sensor Sensitive Level" on the main
menu.
2. Click each sensor sensitive level (Offset, Slice) on
Sensor Sensitive Level dialog box.
3. Click "Close" to get back to the main menu.
Feed Motor 1. Click "Feed Motor" on the main menu.
2. Click "START" on "Feed Motor" dialog box to start
to rotate Paper Feed Motor continuously until
clicking "STOP".
3. Click "Close" to get back to the main menu.
Conveyor Motor 1. Click "Conveyor Motor" on the main menu.
2. Click "START" on "Conveyor Motor" dialog box to
start to rotate Conveyor Motor continuously until
clicking "STOP".
3. Click "Close" to get back to the main menu.
Hopper Drive 1. Click "Hopper Drive" on the main menu.
2. Click "START" on "Hopper Drive" dialog box to
start to execute the hopper's Up/Down
continuously until clicking "STOP".
3. Click "Close" to get back to the main menu.
Operation
Switch OFF
No paper
No paper
No paper
No paper
No paper
No paper
No paper
Door open
Door close
Door close
No paper
Exit forward
Manual feed mode
Out of hopper home position
87
KV-S3065CLSERIES / KV-S3065CWSERIES
Default Remarks
- Changing periodically
(Green→Orange→Red→Green......)
-
-
-
-
-