8.3.9.
Drive Belt
(1)
Remove the Conveyor Lower 2. (See 8.3.8.)
(2)
Remove the Side Cover (L). (See 8.2.7.)
(3)
Loosen the screw (a) and screw (b).
(4)
Slide down the spring until it goes and fasten the screw (a).
(5)
Remove the Drive Belt.
Reassembling Note:
BELT LAYOUT
Tension of the belt: Adjust the belt tension
having about 5 mm bent by pressing the arrow
point by finger tip with 5 N.
8.3.10. Drive Rollers 1, 2, 3
(1)
Remove the Drive Belt. (See 8.3.9.)
(2)
Unlock the Drive Rollers 1, 2, and 3 from the notching holes
of the chassis and remove them.
51
KV-S3065CLSERIES / KV-S3065CWSERIES