KV-S3065CLSERIES / KV-S3065CWSERIES
8.4.10. WAITING SENSOR Board
(1)
Remove the Conveyor Upper 2. (See 8.3.2.)
(2)
Remove the Paper Feed Roller Module. (See 8.3.4.)
(3)
Remove the 2 screws.
(4)
Disconnect the 2 connectors (CN5027, CN5029) on the
WAITING SENSOR Board.
8.4.11. Double Feed Detector (G)
(1)
Remove the Conveyor Upper 2. (See 8.3.2.)
(2)
Remove the Paper Feed Roller Module. (See 8.3.4.)
(3)
Remove the screw, and disconnect the relay connector to
the Double Feed Detector (G) after releasing the connector
wires from the wire clamper.
8.4.12. CIS (F) RELAY Board
(1)
Remove the Conveyor Upper 3. (See 8.3.3.)
(2)
Remove the Turn Conveyor (Inner). (See 8.3.18.)
(3)
Remove the screw and Free-roller module.
70