Panasonic KV-S3065CL SERIES Service Manual page 30

KV-S3065CLSERIES / KV-S3065CWSERIES
(5) Take out a new Retard Roller in the optional Roller
Exchange Kit (KV-SS017 or KV-SS018).
(6) Install a new Retard Roller.
Attach it toward the arrows (2), (3) while pulling the Shaft in
the direction of the arrow (1).
Note:
Pay attention to the roller attachment so that Pins
A, B are inserted in each Notch A, B surely.
Otherwise, a double-feeding or paper jamming may
occur.
(7) Close the Conveyor Lower 1 in the direction of the
arrow shown in the figure.
(8) Close the Front Door slowly until it clicks into place.
(See 7.3.1-(8).)
Note:
After replacing the Paper Feed Roller Module and
Retard Roller, execute "Clear Counter" for replacing
roller with Service Utility. (See 9.3.4.)
30