Using Push Scan Outline of Push Scan This unit has three modes for Push scan. USB mode Image Capture Plus • This mode pushes the scanned data to a computer connected via USB. • Both the scanner and Image Capture Plus process the image. *1 •...
USB Mode Preparation Register a Job Setting List in Image Capture Plus Start Image Capture Plus. • Select [Image Capture Plus Standard] as the application mode. On the [Scan Setting] menu, enable [Job Scan Mode]. Note • You cannot enable [Job Scan Mode] if any documents are left in [Document List]. On the [Scan Setting] menu, click [Job Setting List…].
Scan documents Operate the scanner as follows. Note • If any documents are left in [Document List], Image Capture Plus cannot receive push scan data. Press the Skip/Menu button to select USB mode. ▴ ▾ ◀ ▶ of the cursor button to select a group, and use to select a job.
Network PC Mode Preparation Configure the network settings You should configure the network settings using the LCD on the unit, Network Setting Tool, and Configuration Web. Add the scanner to the computer that will receive scanned data Start Network Scanner Select Tool on the computer that will receive scanned data. Add the scanner to the list.
Scan documents • If any documents are left in [Document List], Image Capture Plus cannot receive push scan data. • Operate the scanner as follows. Press the Skip/Menu button ( ) to select network PC mode. ◀ ▶ of the cursor button to select a computer. Note •...
Preset Scan Mode Note • The file names of images pushed by Preset Scan Mode are as follows. Destination File name E-mail “Host name”-M-“5 digits of serial number”.* “Host name”-S-“5 digits of serial number”.* “Host name”-F-“5 digits of serial number”.* •...
Open the Scan tab. Open the [Scan settings] sub menu. • You can register up to 20 settings. Click to register a setting. Set the scan settings as needed.
Click in [Advanced Settings] to configure the advanced settings of image processing. • The advanced setting box will open. • For details about image processing, refer to the help of Image Capture Plus. Click [Submit] to apply the settings, and then click [Back].
Open the [Preset Scan] sub menu. • You can register up to 30 settings in total. (3 groups, 10 settings for each group.) Click to register a setting. Register the scan settings as needed. Output Settings • Select [Email], [SMB], or [FTP] as the output method. •...
Click [Submit] to apply the settings, and then click [Back]. • Make sure the list has been added. Scan the documents Operate the scanner as follows. Press the Skip/Menu button ( ) to select Preset Scan mode. ▴ ▾ ◀ ▶ to select Preset Group , use to select a Preset Scan setting list.
Using Configuration Web Network settings for this unit can be configured using the web browser that was launched from Network Scanner Select Tool. Note • Some settings can also be configured using the LCD on the unit. • If you are using Internet Explorer 11 and "Display intranet sites in Compatibility View" is selected, Configuration Web may be not displayed correctly.
Basic Browser Operations • To operate the browser, refer to the following. Operation Remarks [Reload] Update the display. You must click [Submit] to change the [Submit] Apply the settings. settings. Return to the original screen from a [Back] sub menu. Open the editing screen for the list.
Function tab Set the basic functions and maintenance functions of the unit. User Settings Item Contents USB ID Language Sets the language used on the LCD and Configuration Web. Sleep Sets the time length before the unit enters sleep mode. (1 to 240 minutes) Power Off Sets the power auto-off function.
Scan tab Register scanning conditions for Preset Scan (Push scanned data to FTP, SMB, or e-mail). Scan Settings / Preset Scan For details about the [Scan Settings] and [Preset Scan] sub menus, refer to “Preset Scan Mode” Scan log You can confirm the preset scan log.
Administrator tab Information Notification Item Contents SMTP Settings Set the SMTP for notification E-mail. Information Notification Enables (On) or disables (Off) the feature. No.1 / No.2 / No.3 You can set three addresses to send the notifications to about Roller Replacement, Roller Cleaning and System Error.
Available Functions When Scanning The functions you can use when scanning dif fer depending on how you are using the scanne r. For details, refer to the following table. Note • For details about the function names, refer to the help for Image Capture Plus, TWAIN, or ISIS. Pull scan Push scan (Using Image Capture Plus,...
Pull scan Push scan (Using Image Capture Plus, • Preset Scan mode (FTP TWAIN, or ISIS) server, SMB folder, e-mail) Function name Push scan • USB mode • Network PC mode Border Removal Available ― Hole Removal Available ― Drop Out Available ―...
Error codes related the network Error codes corresponding to the scanner status are displayed on the LCD. The following shows the error codes related to the network. For other error codes, confirm details using User Utility. Error Code Cause Remedy The scanner is offline.