Panasonic KV-S3065CL SERIES Service Manual page 73

8.4.15. CIS (B) RELAY Board
(1) Remove the Rear Cover with Post-imprinter Door.
(See 8.2.1.)
(2) After removing the screw to release the clamper,
disconnect 2 connectors and 1 connector (Flat cable) on
the CIS (B) RELAY Board.
(3) Remove the 3 screws and pull out the CIS (B) RELAY
Board backward.
8.4.16. PAPER JAM SENSOR Board
(1) Remove the Conveyor Rollers 1, 2, and 3. (See 8.3.16.)
(2) Remove the 2 screws and disconnect the
connector (CN5019) on the PANEL JAM SENSOR Board.
(Back Side View)
(Front Side View)
73
KV-S3065CLSERIES / KV-S3065CWSERIES