KV-S3065CLSERIES / KV-S3065CWSERIES
(4)
Remove the screw to release the clamper.
(5)
Remove the all connectors on the CONTROL Board.
(6)
Remove the 3 screws to release the CONTROL Board from
the plate.
8.4.7.
SIZE DETECTOR Board and Paper Sensor
(1)
Remove the Hopper Unit. (See 8.2.10.)
(2)
Release the 2 guides on both sides of the Hopper Unit to
divide the upper block with the lower.
(3)
Remove the 2 screws.
(4)
Disconnect the 2 connectors (CN5016: Flat cable, CN5021)
on the SIZE DETECTOR Board.
Reassembling Note:
The flat cable with blue color (CN5016) should be
faced to the front side of the board.
(Hopper Unit Back Side View)
68