Panasonic KV-S3065CL SERIES Service Manual page 91

9.3.7. Adjust
Item
Shading 1. Click "Shading" on the main menu to execute
shading correction.
2. Confirm the message "The data of User Shading
will be also overwritten." on the display.
And if the message is acceptable, click "OK".
3. Clean the conveyor, rollers, Image Sensor
Covers according the message on the display.
And click "OK".
4. Switch Reference Plates to white according to the
message on the display.
And click "OK".
5. Set Shading Paper (Part No.: See 14.7.) on the
Hopper Tray in the following orientation.
(i) In case of KV-S3065CW
(ii) In case of KV-S3065CL
And click "OK".
6. Scan the Shading Paper.
7. Switch the Reference Plates to black according to
the message on the display.
And click "OK".
8. Click "OK" to get back to the main menu.
All Position 1. Set 2pcs of test chart A (Part No.: See 14.7.) on
the Hopper Tray in the portrait orientation.
2. Click "All Position" on the main menu to execute
scanning position & length adjustment.
3. Check the result.
4. Click "OK" to get back to the main menu.
Individual Position 1. Adjust Automatically
a. Set test chart A (Part No.: See 14.7.) on the
b. Click "Individual Position" on the main menu.
c. Click one of 5 automatic adjustment menu on
d. Check the result.
e. Click "OK" to finish this adjustment.
f. Click "OK" to get back to the main menu.
2. Adjust Manually
a. Click "Individual Position" on the main menu.
b. Change the parameter (mm, %) on the
c. Click "OK" to renew the setting, and to get
Operation
→ Landscape orientation
→ Portrait orientation
Hopper Tray in the portrait orientation.
"Individual Position" dialog box to execute
adjustment.
"Individual Position" dialog box, as required.
(Refer to Remarks.)
back to the main menu.
Default
-
-
-
91
KV-S3065CLSERIES / KV-S3065CWSERIES
Remarks
Do not stop the shading execution on
its way and do not open any doors.
Set 2 pcs of test chart A in order.
st
1 page: Front side
nd
2 page: Back side
1. Adjust Automatically
5 automatic adjustment
a. Adjust Length
b. Adjust Front V. Position
c. Adjust Front H. Position
d. Adjust Back V. Position
e. Adjust Back H. Position
2. Adjust Manually
(Vertical Position)
+: Increasing the number makes
the document scanning position
shifted downward
(Horizontal Position)
+: Increasing the number makes
the document scanning position
shifted to the right.
(Length)
+: Increasing a number makes the
scanning document length longer.
Note:
If the appropriate scanning
position can not be obtained
by any of the manual
adjustments, check CIS
installation.