Others - Panasonic KV-S3065CL SERIES Service Manual

4.9.

Others

4.9.1. Set ADF / Manual Feed Selector
Depending upon the paper quality, set the ADF / Manual Feed Selector.
1. By setting the ADF / Manual Feed Selector to "Manual" position, the Retard Roller is separated from the Separation Roller.
By this operation, multiple sheet will be scanned as a piece of document.
2. On the other hand, by setting the ADF / Manual Feed Selector to "1, 2, 3, or 4" position, the Retard Roller exerts a
manipulation force onto the documents, and the documents are separated by this manipulation.
Note:
In proportion to the increment of the number (1→2→3→4) on the ADF / Manual Feed Selector, the contact force
between the Retard and Separation Rollers goes up. (When scanning plain paper, set the selector to "2" or "3".)
4.9.2. Set Paper Path Selector
Change the Paper-path Selector position as required.
1. When making the document exit to the upper-front position
→ Push the Paper-path Selector upwards
2. When making the document exit to the lower-back position (Straight pass mode)
→ Push the Paper-path Selector downwards
Note:
For the thicker paper scanning, we recommend the straight paper path.
15
KV-S3065CLSERIES / KV-S3065CWSERIES