Entering Record Mode - Korg Pa300 User Manual

Track volume/status area
This area is where you can set the volume of each Song track,
and mute/unmute tracks.
Volume and virtual sliders
Each track's volume is memorized into the Standard MIDI File.
Drag the sliders to adjust the volume of the corresponding
tracks. You can also change the volume by touching a slider and
using the VALUE DIAL.
Virtual sliders
Use the TRACK SELECT button to switch between Song Tracks
1-8 and Song Tracks 9-16,
Track status icon
The Play/Mute status of each track is memorized into the Stan-
dard MIDI File. Select the track, then touch this area to change
the track status. The status of Song tracks is saved when saving
the Song.
Play status. The track can be heard.
Mute status. The track cannot be heard.
Track names
Under the sliders, a label for each track is shown. Use the
TRACK SELECT button to switch between tracks 1-8 and 9-16.

Entering Record mode

To enter Record mode, press the RECORD button while you are
in Sequencer mode. The following dialog box will appear:
Select one of the three available recording options and touch OK
(or Cancel if you don't want to enter Record mode).
Multitrack Sequencer
Full-featured sequencer. Select this option for
classic multitrack recording. (See "Record mode:
Multitrack Sequencer page" on page 126).
Backing Sequence (Quick Record)
Easy way of recording. Just play with Styles, and
record your performance.
Step Backing Sequence
Step-record. Edit chords and controls for the
Style. Very useful if you are not a keyboard player.
Sequencer 125
Entering Record mode