Cable Connection For Cpu Card; Cable Connection For A/D Board & Fan Power, Power Switch, And Keyboard Control - AXIOMTEK ICS-480V User Manual

ICS-480V 4U Industrial Workstation with 8.4" LCD and 14 slots
backplane User's Manual

2.1.6 Cable connection for CPU card

There four cables come with the ICS-480 barebone;
HDD LED, Reset Switch, Speaker, and Keyboard
Lock. Please refer to your SBC manual to connect
these four jumpers to the SBC.
2.2 Cable Connection for A/D Board &
Fan Power, Power Switch, and
Keyboard Control
There is one four pins power connector need to be
connected to the power supply to provide power to
the A/D board and system Fan.
a. This cable should be connected to the system
power supply. There are three cables needs to be
connect to the backplane.
b. Keyboard Transmitter for Front Membrane Keypad
& DIN 5-pin Keyboard port.
c. Rear DIN 5-pin Keyboard Port.
d. Power Switch.
10
Figure 2.7: System Cables
System Setup